bgs
-
BGS Oil Filter Wrench - 460 mm
rubber coated straplength of strap: 460 mm
€9,79
-
BGS Oil Filter Wrench, 3-arm - for Oil Filter DIA 60 - 100 mm
for filters and filter cartridges in hard to reach areasthree armLeft and right turning effectrobust constructionspecially grooved contact surfaces provide a secure hold on the filteruniversal applicationincl. adapter drive inner square 12.5 mm (1/2 ") to output outer square 10 mm (3/8")
€13,98
-
€6,59
-
BGS Combination Spanner - 30 mm
hot forgedchrome-plated, polished jawsring end 15° angledprofile ring end: 12-point
€13,60
-
BGS Empty Tetron Bag for BGS 1196
Parametri:✅Kopējais svars: 322 g
€10,88
-
BGS Hook Wrench with flexible Jaw
for slotted/grooved nuts (DIN 1804) and for adjusting stirring head bearingsjaw width: 35 - 60 mm
€16,20
-
BGS Double Ring Spanner, open Type - 10 x 11 mm
cold forged size spanner lengthmatt chromeopen ring ends 15° angled
€5,40
-
BGS Repair Kit for Ratchet Head - for BGS 315, 318, 25103, 25105
All wearing components for the head of a ratchet in one set
€10,83
-
BGS Double Ring Spanner, open Type - 24 x 27 mm
hot forgedmatt chromeopen ring end 15° angled
€28,94
-
BGS Valve Spring Compressor "OverHead"
for uncovered valvessuitable for valve spring cap diameters 25 - 38 mmmax. tensioning range: 39 mm
€22,28
-
BGS Repair Kit for Ratchet Head - for BGS 303, 316, 319, 25106
all wearing components for the head of a ratchet in one set
€12,50
-
BGS Machinist's Hammer - 400 g
forgedblack lacqueredergonomically shaped wooden handlewith metal wedge
€9,24
-
BGS Impact Ball Joint - 6.3 mm ,1/4",
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring
€12,45
-
BGS Impact Ball Joint - 10 mm ,3/8",
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring
€13,72
-
BGS Screw Extractor Set - Sizes 1 - 5 - 5 pcs.
for dismantling torn screws and stud boltscarbon steelin plastic casesuitable for following screws:3 - 6 mm (1/8" - 1/4")6 - 8 mm (1/4" - 5/16")8 - 11 mm (5/16" - 7/16")11 - 14 mm (7/16" - 9/16")14 - 19 mm (9/16" - 3/4")
€5,09
-
BGS Screw Extractor Set - Sizes 1 - 6 - 6 pcs.
for dismantling torn screws and stud boltscarbon steelin plastic casesuitable for following screws:3 - 6 mm (1/8" - 1/4")6 - 8 mm (1/4" - 5/16")8 - 11 mm (5/16" - 7/16")11 - 14 mm (7/16" - 9/16")14 - 19 mm (9/16" - 3/4")19 - 25 mm (3/4" - 1")
€8,70
-
BGS Impact Ball Joint - 12.5 mm ,1/2",
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring
€15,19
-
BGS Tap Wrench - M3 - M12
steel handles, detachablesuitable for tap M3 - M12 steel handle width 195 mmretaining head from die-cast zinc for fastening the tapalso as replacement tap wrench for BGS 1900
€6,59
-
BGS Thread Cutting Set - M3 - M12 - 21 pcs.
DIN 352in metal casescope of delivery:each 3 x tap: M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - M12 x 1.75
€34,91
-
BGS Replacement Thread Inserts - M8 x 1.25 - 25 pcs.
Replacement thread inserts for thread repair kit BGS 1959
€12,60
-
BGS Replacement Thread Inserts - M10 x 1.5 - 25 pcs.
Replacement thread inserts for thread repair kit BGS 1959
€14,18
-
BGS Replacement Thread Inserts - M12 x 1.75 - 10 pcs.
Replacement thread inserts for thread repair kit BGS 1959
€9,68
-
BGS Impact Ball Joint - 20 mm ,3/4",
suitable for both manual and impact wrenchescan be fixed on impact wrench by pin and O-ring
€39,89
-
BGS Tool Holder with Sliding Handle for Taps - M3 - M10 - 80 mm
clockwise and anti-clockwise, reversiblerecording 5.5 x 5.5 mm
€13,13
You have seen 24 out of 734 products